Konica Minolta bizhub 200 Service Manual page 602

Field Service Ver. 2.5 Jul. 2006
Item
Condition
No.
2 LAN port sta- Confirm whether the
tus indication HUB power is turned
lamp does not ON.
light.
Confirm whether the
LAN cable is con-
nected to the connec-
tor.
Change the HUB
insertion connector.
(Connect to another
port.)
Replace both the HUB
and LAN cables.
Confirmation Item
The HUB cannot
be turned ON.
HUB failure.
The lamp lights
when you re-
connect the
cable. Connec-
tor connection
failure.
Lamp lights
when you con-
nect to another
port. HUB failure.
Lamp does not
light even if you
change ports.
Action to be
Analysis Taken
(or next Analysis)
Replace the
HUB.
LAN cable is
defective.
Replace the LAN
cable.
Although opera-
ble, replace the
HUB.
Replace the
HUB.
→
If the lamp does
not light, replace
SIP-FAX Adaptor.
12. Troubleshooting
Action to be Taken
(or next Analysis)
If the problem still
is not resolved,
refer to the next
procedure.
If the problem still
is not resolved,
refer to the next
procedure.
If the problem still
is not resolved,
refer to the next
procedure.
225