Fusing Unit Cooling Fan Motor; Toner Suction Fan Motor - Konica Minolta bizhub 200 Service Manual

Field Service Ver. 2.5 Jul. 2006
6.3.36

Fusing Unit Cooling Fan Motor

1. Remove the Upper Rear Cover.
See P.49
2. Remove the Rear Cover.
See P.50
[2]
[3]
6.3.37

Toner Suction Fan Motor

1. Remove the Upper Rear Cover.
See P.49
2. Remove the Rear Cover.
See P.50
[2]
[3]
[1]
[4]
3. Remove three wiring saddles [1] and
disconnect the connector (PJ33) [2].
[1]
4040F2C622DA
4. Remove two screws [3] and the Fus-
ing Unit Cooling Fan Motor [4].
[4]
[3]
4040F2C623DA
3. Remove two screws [1] and two wir-
ing saddles [2], disconnect the con-
nector [3], and remove the Toner
Suction Fan Motor [4].
[1]
4040F2C621DA
6. Other
85