Scanner Motor - Konica Minolta bizhub 200 Service Manual

6. Other
[4]
[5]
[10]
6.3.30

Scanner Motor

1. Remove the Upper Rear Cover.
See P.49
2. Remove the IR Right Cover.
See P.50
[1]
[1]
76
[6]
[7]
4040F2C564DA
[8]
4040F2C565DA
[9]
4040F2C567DA
[1]
[2]
[1]
4040F2C699DA
Field Service Ver. 2.5 Jul. 2006
5. Loosen the screw [4] in front.
6. Remove the screw [5] in front.
7. Loosen the screw [6] in the back.
8. Remove the screw [7] in the back.
9. Remove the Switch Back Unit [8].
10. Remove two screws [9] and the
lower Switch Back Unit [10].
3. Remove ten wiring saddles [1] and
disconnect the connector [2].