List Of Panel Settings (Only With Aculaser C1900) - Epson AcuLaser C1900 Service Manual

EPSON AcuLaser C1900/AcuLaser C900

1.4.2 List of Panel Settings (Only with AcuLaser C1900)

This printer's setting item list is shown below.
Values shown in bold and underlined characters are the factory default setting values.
Table 1-35. Function Setting (1)
Menu Item
Information Menu Status Sheet
Reserve Job List *1
*2
Form Overlay List
Network Status Sheet
AUX Status Sheet *4, *5
*6
PS3 Status Sheet
PS3 Font List *6
ESC/Page Font Sample
LJ4 Font Sample
ESCP2 Font Sample
FX Font Sample
I239X Font Sample
C Toner *8
M Toner *8
*8
Y Toner
K Toner *8
Photocondctr *8
Total Pages *8
Color Pages *8
*8
B/W Pages
Status Menu *9
Product Description
Value
*3
*7
E****F, E*** F, E** F, E*
E F
E****F, E*** F, E** F, E*
E F
E****F, E*** F, E** F, E*
E F
E****F, E*** F, E** F, E*
E F
E****F, E*** F, E** F, E*
E F
0 ~ 99999999
0 ~ 99999999
0 ~ 99999999
Table 1-35. Function Setting (1) (continued)
Menu
Tray Menu MP Tray Size
LC Size
MP Type
LC Type
Note *1: Displayed only when a Job is registered in Quick Print Job
*2: Displayed and can be executed only when Form Overlay is implemented
*3: Displayed only when the printer starts with Network menu → Network I/F = On
*4: Displayed only when Type-B level 3 is installed
*5: Displayed only when the printer starts with AUX menu → AUX I/F = On
*6: Displayed only when the optional PostScript3 module is installed
*7: Not displayed on the panel, but can be executed from EJL
*8: Can only be viewed but not modified
*9: Displayed only when warning is occurred. All warnings occurred when entering
SelecType Mode can be confirmed in this menu.
F,
*10: A4 or LT, depending on the default paper size of the controller configuration when
shipped from the factory.
F,
*11: Displayed only when the optional Cassette Unit is installed
*12: Set the paper size of Paper Cassette Unit to use. The factory default is not depend on
F,
the controller configuration and always set to A4.
*13: Can be automatically set to Envelope by the engine if MP Tray Size is set to
F,
Envelope (MON, C10, DL, C5, C6, IB5). The print speed for Envelope is
approximately 2 ppm. Letter Head, Transparency, and Label cannot be used in the
LC.
F,
Control Panel
Item Value
*10 *10
A4 , A5, B5, LT , HLT, GLT, EXE, MON,
C10, DL, C5, C6, IB5
*11, *12
A4, LT
Plain, Letterhead, Recycled, Color, Trnsprncy,
Labels
Plain, Recycled, Color
Revision B
49