Rack Motor (M2) - Epson AcuLaser C1900 Service Manual

EPSON AcuLaser C1900/AcuLaser C900

4.5.9 Rack Motor (M2)

1. Remove the Cleaner Pressure Flapper Solenoid (SL4). (p.189)
2. Remove the cam inside the printer body (1 E-ring) and remove the Rack Drive Assy. (5
screws, 2 sets of harness)
(See "Figure 4-29 (p.190)")
3. Remove the shaft of the Rack Clutch and remove the Drive Gear.
(1 E-ring) (See "Figure 4-30 (p.190)")
4. Remove the Rack Motor (2 screws)
(See "Figure 4-31 (p.190)")
Figure 4-29. Removing the Rack Drive Assy
Disassembly and Assembly Printer Main Parts Disassembly and Assembly
Figure 4-30. Removing the Drive Gear
Figure 4-31. Removing the Rack Motor
Revision B
190