Micr Control Commands (Only For Printers With Micr); Dle Eot Bs N - Epson TM-H5000II Series Manual

CONFIDENTIAL

6.6 MICR Control Commands (only for printers with MICR)

DLE EOT BS n

[Name] Transmit real-time MICR status
[Format] ASCII
Hex
Decimal
n = 1
[Range]
[Description] Transmits the selected MICR status specified by n in real time as follows:
n
1
· The status information to be transmitted is shown in the tables on the following
[Notes]
pages.
· The printer starts MICR status transmission when this command is buffered in
the receive buffer.
· When transmitting status, the printer transmits only 1 byte without confirming
the condition of the DSR signal.
· This command is executed even when the printer is in off-line, the receive
buffer full, or in an error status with a serial interface model.
· With a parallel interface model, this command can not be executed when the
printer is busy. This command is executed even when the printer is off-line or
there is an error status when DIP switch 2-1 is on with a parallel interface
model.
· The status is transmitted whenever the data sequence for DLE EOT BS n
( n = 1) is received.
· This command should not be contained within another command that consists
of 2 or more bytes.
· This command is effective even if the printer is not selected by set peripheral
device command, ESC =.
· This command is ignored while the printer transmits reading results of MICR
(FS a 0, FS b).
· When Automatic Status Back (ASB) is enabled using the GS a command, the
status transmitted by the DLE EOT BS command and the ASB status must be
differentiated using the table in Appendix E.
DLE EOT
10 04
16 4
Function
Transmit MICR status
Example:
In ESC * * * * m n
n d 1 ... dk , d1 =<10>H, d2 =<04>H, d3 =<01>H
L H
Example:
If you attempt to transmit ESC 3 n to the printer, and then DLE EOT BS 1
interrupts before n is received, the code <10>H for DLE EOT BS 1 is
processed as the code for ESC 3 <10>H.
TITLE
TM-H5000 II II II II series
Specification
(STANDARD)
BS n
n
08
n
8
SHEET
REVISION
E
NO.
SHEET
NEXT
194
195