EPSON AcuLaser C1900/AcuLaser C900
4.4.8 Right Door
1.
Remove the Front Door. (p.178)
2.
Remove the Rear Cover. (p.178)
3.
Remove the Front Cover. (p.179)
4.
Remove the Right Front Cover and Right Rear Cover.
(Securing screws: 1 screw for Right Front Cover and 2 screws for Right Rear Cover)
(See "Figure 4-12 (p.180)")
Figure 4-12. Right Rear Cover Removal
5.
Pull off the harness from the connectors (PJ16, PJ17 and PJ29) on the PWB-A Board
and remove the harness from the cord holders.
6.
With the Right Door opened, remove the one screw while supporting the Right Door
with your hand and remove the strap.
(See "Figure 4-14 (p.180)")
Disassembly and Assembly
Figure 4-13. Harness Disconnection
Figure 4-14. Right Door Removal 1
Cover Removal
Revision B
180