Usb Interface Specifications; Ethernet Interface Specifications (Aculaser C1900) - Epson AcuLaser C1900 Service Manual

EPSON AcuLaser C1900/AcuLaser C900

1.3.3.2 USB Interface Specifications

Universal Serial Bus Specification Rev.2.0 FS is supported, at 12 Mbps.
AcuLaser C1900/AcuLaser C900 has an 18-digit serial ID. The ID is printed on the
bottom of the Status sheet. Each of the 18 digits denotes the following information.
1, 2: A number of 00 to 99. Acquired for each model.
"16" for AcuLaser C1900. "17" for AcuLaser C900.
3: "P" for page printer
4, 5: PC number on the assembly belt
6, 7: Year of assembly
8, 9: Month of assembly
10, 11: Day of assembly
12, 13: Hour of assembly
14, 15: Minute of assembly
16, 17: Second of assembly
18: Reserved digit (0 is normally specified)
The specified USB serial numbers are confirmed in the Status Sheet. The numbers are
displayed on the bottom left of the Status Sheet, next to the ROM version.
If the Main Board is replaced for repair, the USB serial number
C A U T I O N
must be changed to another USB ID. Consequently, a computer
connected to the repaired printer recognizes the printer as a
different one, requiring the printer to reinstall a USB port driver.
Refer to USB ID Input (p.210)
Product Description
.
Controller Unit Specifications

1.3.3.3 Ethernet Interface Specifications (AcuLaser C1900)

Interface Types:
10Base T, 100Base TX, Half Duplex, Full Duplex: auto switching when the power
is turned On.
Printing Protocols
TCP/IP
LPR, FTP, IPP, PORT2501, PORT9100
Microsoft Network
SMB
Netware
Operating mode
Standby (factory default), NDS Print Server, Bindery Print Server, Remote
Printer
AppleTalk
Control Protocols
TCP/IP
SNMP, ENPC, HTTP, TELNET, DHCP, BOOTP, PING
Microsoft Network
Auto-IP, SSDP
NetBEUI
SNMP, ENPC
Netware
SNMP, ENPC
AppleTalk
SNMP, ENPC
NOTE: ENPC:EPSON Network Peripheral Control Protocol
IPP: Internet Printing Protocol
Revision B
44