EPSON AcuLaser C1900/AcuLaser C900
<AcuLaser C900>
Host based controller
CPU: VR4305-48MHz
Standard RAM: 16 MB,
with additional RAM DIMM expanding to a maximum of 144 MB
Color technologies
CPGI, CRIT (Color RIT) installed
Two types of standard interfaces installed
IEEE1284 compatible parallel interface supporting ECP
USB I/F
SOFTWARE FEATURE
<AcuLaser C1900>
Emulation included as standard
ESC/Page Color mode
LJ4, GL2, ESC/P2, FX, I239X, ESC/Page (monochrome mode)
Optional emulation
Adobe PostScript 3
Ability to update the firmware
Supply of program on Flash DIMM makes update of firmware possible
(no MASK during mass production).
Ability to update the engine controller program.
This function is only supported for the evaluation sample.
DCC command support.
Diag command only.
Product Description
<AcuLaser C900>
ESC/PageS installed
Color supported
Duplex printing supported
Network compatibility
Use of background job commands establish network connections.
Product Description
Figure 1-1. External Appearance
Revision B
23