Extron electronics CrossPoint 450 Plus Series User Manual page 192

Reference Information
CrossPoint 450 Plus Specifications
Video
Routing
2412 Series .......................... 24 x 12 matrix
2424 Series .......................... 24 x 24 matrix
3216 Series .......................... 32 x 16 matrix
3232 Series .......................... 32 x 32 matrix
Gain ................................................. Unity
Bandwidth ...................................... 450 MHz (-3 dB), fully loaded
0 - 10 MHz .......................... No more than +0.1 dB to -0.1 dB
0 - 130 MHz ........................ No more than +0.8 dB to -0.8 dB
Crosstalk ......................................... -80 dB @ 1 MHz, -78 dB @ 5 MHz, -55 dB @ 10 MHz, -45 dB @ 30 MHz,
Switching speed ............................ 200 ns (max.)
Video input
Number/signal type ..................... 24, or 32 RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video, S-video,
Connectors
2412/2424 Series ................ 24 x 5 BNC female
3216/3232 Series ................ 32 x 5 BNC female
Nominal level ................................ 1 Vp-p for Y of component video and S-video, and for composite video
Minimum/maximum levels ........ Analog: 0.5 V to 2.0 Vp-p with no offset
Impedance ...................................... 75 ohms
Horizontal frequency .................... 15 kHz to 150 kHz
Vertical frequency .......................... 30 Hz to 150 Hz
Return loss ...................................... <-30 dB @ 5 MHz
DC offset (max. allowable)........... 1.5 V
Video output
Number/signal type ..................... 12, 16, 24 or 32 RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video,
Connectors
2412 Series .......................... 12 x 5 BNC female
3216 Series .......................... 16 x 5 BNC female
2424 Series .......................... 24 x 5 BNC female
3232 Series .......................... 32 x 5 BNC female
Nominal level ................................ 1 Vp-p for Y of component video and S-video, and for composite video
Minimum/maximum levels ........ 0 V to 2.0 Vp-p (follows input)
Impedance ...................................... 75 ohms
Return loss ...................................... -30 dB @ 5 MHz
DC offset ......................................... ±5 mV with input at 0 offset
Switching type ............................... Triple-Action
B-2 CrossPoint / MAV Matrix Switchers • Reference Information
-37 dB @ 100 MHz
composite video
0.7 Vp-p for RGB and R-Y and B-Y of component video
0.3 Vp-p for C of S-video
S-video, composite video
0.7 Vp-p for RGB and R-Y and B-Y of component video
0.3 Vp-p for C of S-video
™