Command/Response Table For Ip-Specific Sis Commands; Symbol.definitions - Extron electronics CrossPoint 450 Plus Series User Manual

Command/Response Table for IP-specific SIS Commands

Symbol definitions
X3)
= Matrix name
N The following characters are invalid in the name: {space} ~ , @ = ` [ ] { } < > ' " ; : | \ and ?.
X3!
= Default name
X3@
= Time and date (for set)
X3#
= Time and date (for read)
X3$
= GMT offset
X3%
= Daylight Saving Time
X3^
= IP address
X3&
= Hardware (MAC) address
X3*
= Number of open connections
X3(
= Password
The following characters are invalid in passwords: {space} + ~ , @ = ` [ ] { } < > ' " ; : | \ and ?.
N
X4)
= Domain name
The following characters are invalid in a domain name: {space} + ~ , = ` [ ] { } < > ' " ; : | \ and ?. The @ character is acceptable only as
N
the lead-in to the domain name (such as @extron.com).
X4!
= E-mail account
X4@
= E-mail address
X4#
= Notify when?
X4$
= Notification selections
X4%
= Notify status (for read)
X4^
= DHCP
X4&
= Port #
X4*
= Baud rate
X4(
= Parity
X5)
= Data bits
X5!
= Stop bits
X5@
= Port type
(Up to 240 alphanumeric characters)
Factory default name (model name + last 3 pairs of MAC address)
In the format MM/DD/YY•HH:MM:SS, where:
MM = month: 01 (January) through 12 (December)
DD = 01 through 31
YY = 00 through 99
HH = 00 through 23
MM = 00 through 59
SS = 00 through 59
In the format Day,•DD•Mmm•YYYY•HH:MM:SS, where:
Day = weekday: Mon through Sun
DD = 01 through 31
Mmm = month: Jan through Dec
YYYY = 2000 through 2099
HH = 00 through 23
MM = 00 through 59
SS = 00 through 59
–12.0 through +14.0. Hours and minutes removed from GMT
0 = Daylight Saving Time off/ignore
1 = Daylight Saving Time on (northern hemisphere)
2 = Daylight Saving Time on (Europe)
3 = Daylight Saving Time on (Brazil)
###.###.###.###
##-##-##-##-##-##
0 - 255
12 alphanumeric characters
Standard domain name rules apply (for example: nnnnn@xxx.com)
65 - 72. 65 = e-mail recipient 1, 66 = 2, 67 = 3, ... 72 = recipient #8
Typical e-mail address format (for example: nnnn@xxx.com)
0 = no response
1 = fail/missing
2 = fixed/restored
Matrix size 2412 and larger:
Matrix size 1616 and smaller:
34- or 17-digit number. For each digit: 0 = do not notify, 1 = notify
0 =1 off, 1 = on
00 through 99 (00 = all ports)
9600, 19200, 38400, 115200
odd, even, none, mark, space (only the first letter required)
7, 8
1, 2
0 = RS-232
1 = RS-422
2 = RS-485
CrossPoint / MAV Matrix Switchers • Programmer's Guide
3 = both 1 & 2
4 = suspend
01 - 32 = input 1 through input 32
98 = power supplies
99 = fans
01 - 17 = input 1 through input 16
17 = power supply
4-21