Date, Time (Local), And Gmt (Offset) Fields; Sync.time.to.pc.button; Use.daylight.saving.check.box - Extron electronics CrossPoint 450 Plus Series User Manual

Date, Time (local), and GMT (offset) fields

The Date field displays the current date in the Greenwich Mean Time zone.
The Time (local) field displays the current time in the local time zone.
The GMT field displays the amount of time, in hours and minutes, that the local
time varies from the GMT international time reference.
N Rather than the following procedure, your can click the Sync Time to PC
button to set the switcher to your computer's internal time.
If desired, adjust any of these values as follows:
1. Click in the desired field. The field changes to an editable field appropriate to
the value being change and the graphic cursor becomes a text cursor.
• The Date field is in the format
(M)M/(D)D/YYYY. Leading zeroes are not
shown.
• The Time (local) field is in the format HH:MM:SS,
(00:00:00 to 23:59:59).
• The GMT field (offset from GMT) is in the format ±HH:MM
(–12:00 to +14:00).
2. Edit the field as desired to set the proper proper value. For time, use the
24-hour time standard. Leading zeroes are optional.
3. Press the Tab key on the keyboard or click in another field to exit the set date ,
set time, set offset field.
4. Click the Take button to make the date change take affect.
Sync Time to PC button
Clicking the Sync Time to PC button causes the computer you are operating to
send its internal time to the switcher in a set time command.
Use Daylight Saving check box
Click in the Use Daylight Saving checkbox to turn Daylight Saving Time on and
off for North America. When Daylight Saving Time is turned on, the switcher
automatically updates its internal clock between Standard Time and Daylight
Saving Time in the spring and fall on the date that the time change occurs in North
America. When Daylight Saving Time is turned off, the switcher does not adjust its
time reference.
N For Daylight Saving Time in Europe and Brazil, refer to the Set Daylight
Saving Time SIS command on page 4-23.
CrossPoint / MAV Matrix Switchers • Matrix Software 5-9