Extron electronics CrossPoint 450 Plus Series User Manual page 59

4. Press and release the output 3, output 4, and output 8 buttons (figure 3-8).
Press and release the Output 3, Output 4, and Output 8 buttons.
The buttons blink amber to indicate that the selected RGBHV or video and audio
input will be tied to these outputs.
1 2 3 4
17 18 19 20 21 22 23 24 31 32
Figure 3-8 — Select the outputs
N You can cancel the entire set of ties at this point by pressing and releasing the
Esc button. The Esc button flashes red once.
5. Press and release the Enter button (figure 3-9).
Press the Enter button to
confirm the configuration
change.
All input buttons and output buttons
ENTER
return to unlit or background illumination.
The Enter button returns to
unlit or background
illumination.
Figure 3-9 — Press the Enter button
The current configuration (figure 3-10) is now:
• Input 5 video and audio is tied to output 3, output 4, and output 8
Figure 3-10 — Example 1, final configuration
CrossPoint / MAV Matrix Switchers • Operation
5 6 7 8 15 16
C O N T R O L
O
U
VIEW ESC
ENTER PRESET
T
P
U
T
The Enter button blinks
S
green to indicate the need to
confirm the change.
3-15