File Management Tab; File.management.page - Extron electronics CrossPoint 450 Plus Series User Manual

6. Click the Firmware Upgrade link.
7. Click the Browse button. An Open File window appears.
8. Navigate to the folder where you saved the firmware upgrade file. Select the
file.
N Valid firmware files must have the file extension ".S19". Any other file
N The original factory-installed firmware is permanently available on the
9. Click the Open button.
10. Click the Upload button. The firmware upload to the switcher may take a few
minutes.

File Management Tab

File Management Page
To delete files such as user-supplied HTML pages from the switcher or to upload
your own files to the switcher, click the File Management tab. The switcher
downloads the file management HTML page (figure 6-9).
Figure 6-9 — File Management page
N The files listed in figure 6-9 are shown for example only and may not be present
To delete a file, click the Delete button adjacent to the unwanted file.
extension is not a firmware upgrade.
CrossPoint or MAV switcher. If the attempted firmware upload fails for any
reason, the switcher automatically reverts to the factory-installed firmware.
on your switcher.
CrossPoint / MAV Matrix Switchers • HTML Operation 6-11