Table of Contents
Advertisement
If the ink is not a product specified by Roland DG Corporation, the speed and quality of printing will be
affected by operations for preventing head malfunctions. To obtain optimal performance, we recommend
that you use ink specified by Roland DG Corporation. To purchase ink, contact your authorized dealer.
[Fill the cleaning liquid tank with cleaning liquid.]
Only a small amount of cleaning liquid remains.
Refill the cleaning liquid tank with cleaning liquid.
RELATED LINKS
・
P. 102Cleaning Liquid Replenishment Method
[Operation of the take-up unit stopped.]
This message appears and the take-up unit stops when it is not possible to detect the position of the
dancer roller for a continuous length of time during media feeding or pull back.
Tap [Operation of the take-up unit stopped.] and follow the instructions on the screen to recover the
take-up unit.
[Install the media clamps correctly.]
This message appears when the media clamps are not placed at the predetermined positions.
Check the loading status of the media and that the pinch rollers have been positioned correctly, and then
correctly set the media clamps at the ends of the media.
RELATED LINKS
・
P. 27Setup of New Media
・
P. 60Setup of Registered Media
[Media clamps could not be detected.]
This message appears when the media clamps cannot be detected because they are hidden by the me-
dia.
Check the loading status of the media and that the pinch rollers have been positioned correctly, and then
correctly set the media clamps at the ends of the media.
This message appears when the media clamps cannot be detected because their parts that are read
are dirty with, for example, ink.
Use cleaning liquid and a cleaning stick to clean the white parts on the media clamps.
It may not be possible to detect the media clamps because the multi sensor is dirty with ink due to
reasons such as the media striking it immediately after printing.
Messages on the Operation Panel
Messages
227
Advertisement
Table of Contents
