Preventing Soiling Of The Media And Dot Drop-Out - Roland VersaUV LEJ-640 F User Manual

Accommodating to the Types and Condition of Media
Procedure
Press
MENU
SUB MENU
SUB MENU
PERIODIC CL.
PERIODIC CL .
NONE
W XXXmm
SETUP SHEET
ROLL
4
Description
In the following cases, Ink tends to collect on the surface of the heads. Under some conditions, this ink may
be transferred to the media or cause dot drop-out.
When you use media prone to buildup of static charge.
When the ambient temperature is low.
When the head height is set to "HIGH."
Selecting "PAGE" or a value from "5 min" to "990 min," the ink buildup is removed before or during printing
while printing is performed. Note, however, that using "PAGE" or a value from "5 min" to "990 min," results in
longer printing times.
[PERIODIC CL.]: NONE.
82
.
Press
Press
Press
Press
Press
10 min
Automatic cleaning is performed every time before printing starts.
5 to 990 min
Automatic cleaning is performed when the cumulative printing time
reaches the value you set here.
Automatic cleaning is not performed.
Press
Press
original screen.
.
.
to select an item.
to enable the setting.