Customizing A Tour; Changing The Order Of Sites In A Tour; Figure 13-2 Default Amount Of Time For A Tour Of Each Unit - Honeywell Rapid Eye Administrator's Manual

Customizing a Tour

Changing the Order of Sites in a Tour

Document 800-02953V4 Rev A
03/10
3. Click Save and Close.
Figure 13-2 Default Amount of Time for a Tour of Each Unit
For each tour, you have the option of specifying:
• The order in which sites are displayed in a tour (see
Tour on page 255).
• The time spent at each site during a tour (see
During a Tour on page 256).
• The connection to be used to reach the site. By default, the first connection in the
site's definition is used (see
page 256).
1. Using Admin, select the Tours tab.
2. To display the Update Tour dialog box, do one of the following:
• Double-click the name of the tour that you want to customize.
- or -
• Select the tour that you want to customize, then either: click
Update on the Actions menu, or press the F12 key.
3. In the Update Tour dialog box, drag and drop a site name to a new position in the list.
4. You can click Save and Close or make more changes to the site tour.
Rapid Eye Multi-Media DVR System Administrator Guide
Changing the Time Spent at a Site
Selecting Another Connection to a Site During a Tour
Changing the Order of Sites in a
on the toolbar,
on
255