Setting Ptz Presets, Patrols And Patterns; Understanding Ptz Controls; Customizing Presets; Figure 9-3 Ptz Control Panel - Honeywell Performance HRG4 User Manual

Setting PTZ Presets, Patrols and Patterns

The HRG DVR allows you to program presets, patrols, and patterns for a connected PTZ
camera.

Understanding PTZ Controls

The PTZ control panel provides a series of PTZ controls (see
2
1
3
4
The controls on the panel include:
1.
2.
3.
4.
5.
6.
7.
8.
9.

Customizing Presets

Presets can be set to move your PTZ camera to a desired preset location.
To set up and call custom PTZ presets:
1.
2.
3.
Figure 9-3 PTZ Control Panel
5 6
Directional Pad/Auto-scan Buttons: Controls the movements and directions of the PTZ.
The center button is also used to start the auto-scan of the PTZ.
Zoom: Used to zoom in and out with the PTZ.
Focus: Used to adjust the focus of the PTZ.
Iris: Used to open up or close the iris of the PTZ.
Speed: Adjusts the movement speed of the PTZ.
Light: Turns the PTZ light (if applicable) on and off.
Wiper: Turns the PTZ wiper (if applicable) on and off.
Zoom In: Instantly zooms the PTZ in.
Center: Centers the PTZ.
Open the PTZ Control panel
pressing PTZ on the front panel of the DVR.
Click Preset to enter the Preset Management menu.
In the Preset Management menu (see
• Configure Preset: Use the PTZ control panel to adjust the position of the preset.
Select a Preset number and click Set to save preset location.
• Clear Preset: Select a Preset number and click Clear to delete the preset. You can
also click Clear All to delete all presets.
• Call Preset: Select a Preset and click Call.
7 8 9
(Figure 9-3) by selecting PTZ in the right-click menu or by
Figure 9-4) you can:
PTZ Control | 83
Figure 9-3).
800-12005 - A - 06/2012