Connecting The Dvr For Remote Access; Figure 2-6 Video Out Connector; Figure 2-7 Rs232C Port; Figure 2-8 Network Port - Honeywell HRSD8 User Manual

Installation

Connecting the DVR for Remote Access

Connecting the RS232C Port
An RS232C port is provided to connect an external modem for remote monitoring,
configuration, software upgrades, and to connect a remote control keyboard. Use a
modem cable with a DB9S (female) connector to connect to the DVR. See
Configuration
Connecting the Network Port
The DVR can be networked using the 10/100Mb Ethernet connector. Connect a Cat5
cable with an RJ45 jack to the DVR connector. The DVR can be networked with a
computer for remote monitoring, searching, configuration, and software upgrades. See
Chapter 3, Configuration
26
Figure 2-6 Video Out Connector
Note The VGA and Video Out (BNC) connectors may be connected to
individual monitors for simultaneous operation.
for how to configure the modem.
Figure 2-7 RS232C Port
Note The DVR is not supplied with a modem cable, and many
modems are not supplied with cables. Ensure that you have the
correct cable when purchasing the modem.
Figure 2-8 Network Port
for configuring the Ethernet connections.
Chapter 3,