Making Default Settings For Printing (Using Queue Properties); Queue Properties Overview; Operational Procedures - Roland SC-545EXW Manual

Guide to printing on transparent media (using white ink)

Hide thumbs Also See for SC-545EXW:

Table of Contents

2-3 Making Default Settings for Printing (Using Queue Properties)

Before you start printing the PS files you saved under "2-2 Creating Data for Printing", you can make default settings

such as selecting the media and mode for printing in the Roland VersaWorks program.

Roland VersaWorks has two "queue folders", labeled A and B, in its main window. You can assign a set of default print

settings to each of these folders using the [Queue A (B) Properties] dialog box, which is displayed by double-clicking

either of the queue folders.

In the following operations, you will use the queue folders as described below.

Queue folder A ............ Use this folder to assign default settings for printing CMYK color data (that is,

Queue folder B ............ Use this folder to assign default settings for printing white data (that is, white layer

Note

It is possible to make changes to the default settings independently before printing each file by using the [Job Settings]

dialog box for each of print jobs. Concepts and Operations of the [Job Settings] dialog box will be mentioned later

under "2-4 Making Job Settings and Printing the image".

Start up Roland VersaWorks on your computer.

Check the printer model and status in the main window.

Printer model : SOLJET ProII V SC-545EX

Status : Ready to Print

For details about how to connect the printer to the computer that the Roland VersaWorks program installed, see

"Roland VersaWorks Quick Start Guide" or the online help.

CMYK layer of the image).

of the image).

Table of Contents