Boot To Command Mode - Symbol Series 3800 Reference Manual

Series 3800 Product Reference Guide

Boot to Command Mode

Command Mode provides functions for:
Running the Self-Test program to verify that the hardware is operating properly
!
(refer to Chapter 7, Error Recovery and Troubleshooting).
Performing a Memory Transfer to upload data from a terminal to a host system (refer
!
to Chapter 7, Error Recovery and Troubleshooting).
Performing a Program Download to transfer an application from the host to a
!
terminal (refer to Chapter 3, Batch and Spectrum One Terminal Setup).
35-Key Keyboard
1. Turn the terminal off.
2. Press and hold down BKSP and SHF.
3. Press and release PWR.
4. Release the BKSP and SHF.
46-Key Keyboard
1. Turn the terminal off.
2. Press and hold down the F and I keys.
3. Press and release the PWR key.
4. Release the F and I keys.
5-6