Table of Contents
Advertisement
3. Select the range of memory to transfer by pressing the first letter of the desired range
(All, Range, or None), or use the UpArrow or DownArrow and press <ENTER>.
If you select All, the program skips to the range verification screen (step 7).
If you select Range, the screen displays:
4. Specify a range of RAM by setting the Start and End addresses.
Use RightArrow and LeftArrow to move the cursor to the digit to be changed.
Use UpArrow and DownArrow to change the values.
Type a range and press <ENTER>.
5. Specify a range of NVM to transfer. Choose All or None.
6. If the system has EMS installed, it prompts for the range to transfer; otherwise, it
skips this screen:
The range is specified in page numbers (16 KB per page). Use RightArrow and
LeftArrow to move between the Start and End values. Use UpArrow and
DownArrow to change the page number value.
Set the range and press <ENTER>.
7. The terminal displays a range verification screen.
For example:
If the values are correct, press <ENTER>. If the values are not correct, press <CLR>
to clear the fields and select new values.
RAM
Use Arrow Keys
Start
End
00000
9FFFF
EMS
Use arrow keys
Start
End
RAM
0000
3FFF
NVM
D510
DFFF
EMS
0000
010
Correct? <ENT>
Error Recovery and Troubleshooting
7-11
Advertisement
Table of Contents
Troubleshooting
