Symbol Series 3800 Reference Manual page 126

Series 3800 Product Reference Guide
Note: Press Q in any subsequent menu to return to the DIAG24 menu or to
exit DIAG24 from this menu.
2. Press either (1) AP Ping Test or (2) Field Diagnostics. Press Q to quit.
Whichever mode was selected from the DIAG24 menu, the subsequent set-up menus
that follow are identical, except for the title line which indicates the selected test
mode: AP PING TEST for selection 1; FIELD DIAGNOSTICS for selection 2 (see
Figure E-13).
3. Select the roaming mode. For each AP listed by line number:
bb
eeeeeeeeeeee
" If you select Roaming Enabled, the terminal pings the associated AP and roams
as required between APs.
" If you select a specific AP in the list, the test is conducted solely with that AP.
" If more APs are in range than can fit on one screen, the last selection is "More".
Select this to present more APs for selection.
E-14
<Test Mode>
1. Roaming Enabled
2. bb--eeeeeeeeeeee
3. bb--eeeeeeeeeeee
:::
:::
n. bb--eeeeeeeeeeee
Select [1-n or 'Q']:
Figure E-13. Test Mode Screen
represents the AP identifier (or BSS identifier)
is the 48-bit MAC address of the AP in hexadecimal
notation.