Symbol Series 3800 Reference Manual page 67

35-Key Keyboard
To perform a system cold boot with the 35-key keyboard:
1. Power off the terminal.
2. Press and hold the up arrow ( ), SPACE, and FUNC keys.
3. Press and release the PWR key.
4. Release the
46-Key Keyboard
To perform a system cold boot with the 46-key keyboard:
1. Power off the terminal.
2. Press and hold the A, B, and D keys.
3. Press and release the PWR key.
4. Release the A, B, and D keys.
The terminal displays version information, copyright, RAM size, and installed expanded
memory RAM size. Other information displayed depends on the operating system, installed
device drivers, and AUTOEXEC.BAT commands.
Cold-Boot Failure
During a cold boot, the system briefly displays a status line for each driver as it loads in the
format:
0: Driver #.##
The line shows a status value, usually 0, followed by the name and version number of the
driver. If the system halts at one of these lines and displays a status value other than 0, the
displayed device driver failed to load properly.
If such a failure occurs, try cold booting the terminal again. If this does not solve the problem,
call the Symbol Support Center.
More troubleshooting information is provided in the publications listed in Related
Documentation at the beginning of this manual.
, SPACE, and FUNC keys.
Operating the Series 3800
5-5