Symbol Series 3800 Reference Manual page 50

Series 3800 Product Reference Guide
i. Select Power Management from the main configuration menu. The Power
Management screen (Figure 4-10) is displayed.
To change the current power management mode, use the
between the settings "PSP" and "CAM". The default setting is "PSP".
Press <ENTER> to effect the change. Press <CLEAR> to exit without changes.
5. When all of your changes are made, press < CLEAR> to return to the main
configuration menu.
6. Select Exit from the main configuration menu and press <ENTER> to exit the
configurator.
The Series 384X displays the message:
and proceeds with the initialization which writes the configuration values to a
R/W non-volatile section of radio flash memory.
4-10
POWER MANAGEMENT
Radio Power Mode
PSP
#$, Clear, Enter
Figure 4-10. Power Management Screen
...updating config
data
#$
keys to toggle