Symbol Series 3800 Reference Manual page 55

7. When the hex download is complete, the 384X automatically reinitializes (warm
boots) and copies the files in the software package to the flash disk. If the 384X does
not reinitialize, re-initialize the 384X using the following key sequence:
Note: The 384X must be re-initialized to copy the software to the flash disk.
For the 35-key 384X:
" Press and hold the + and / keys.
" Press and release PWR.
" Release the + and / keys.
For the 46-key 384X:
" Press and hold the 4 and 5 keys.
" Press and release PWR.
" Release the 4 and 5 keys.
Note: If you get a timeout message at any time during the procedure, press
<ENTER> to return to the screen.
8. The software is copied on to the flash disk.
9. Proceed with initializing the network connection as described in the section Initiating
Network Connection.
Note: If you downloaded multiple applications, a "select" screen appears
before the 384X attempts to associate with an AP, requesting that you
select an application.
Symbol Technologies
NVM Loader 2.09-XX
Address: XXXX
Spectrum24 Terminal Setup
4-15