Ping Tests - Symbol Series 3800 Reference Manual

Series 3800 Product Reference Guide
7. Select whether to sound a beep if an error is encountered in the Beep Mode screen
shown in Figure E-16. Press the corresponding number to make the selection and
advance to the test screens.
Press Q or <CLEAR> to return to the main menu.

Ping Tests

During an AP ping test, the screen shown in Figure E-17 is displayed and continuously
updated.
Each ping results in a new line being displayed, showing the cumulative ping count, error
count, AP identifier of the AP the terminal is associated with, and the RSSI value of the
terminal reception. If there was an error, an indicator appears at the right-hand end of the
line (see line 5 in Figure E-17). The report wraps around so that, at any given time, the last
five message reports are visible.
The 'A' at the left end of line 2 in Figure E-17 indicates that the terminal is associated with
an AP. A 'U' indicates that the terminal is not associated.
E-16
AP PING TEST
A Cnt Err AP RS
56 2 04 36
57 2 04 36
58 3 04 36 TMO
59 3 04 36
55 2 04 36
Press 'Q' to Quit
Figure E-17. AP Ping Test Results