Symbol Series 3800 Reference Manual page 116

Series 3800 Product Reference Guide
2. Select Net Id from the CFG24 Menu. The Net Id screen (Figure E-3) is displayed.
The Net Id identifies the radio network and differentiates between different radio
networks. All equipment on one network must use the same Net Id.
To change the current Net Id value, backspace over the current value and type a new
value, in hexadecimal format, in the range 101 to 1FE. Alphabetical hex values can
appear in upper or lower case.
Press <ENTER> to effect the change. Press <CLEAR> to exit without changes.
3. Select Subnet Mask from the main configuration menu. The Subnet Mask screen
(Figure E-4) is displayed.
To change the current Subnet Mask setting, backspace over the current value and
type a new value, in decimal form. Each part of the four-part address must be in the
range 0 to 255.
Press <ENTER> to effect the change. Press <CLEAR> to exit without changes.
E-4
NET ID
Enter Net Id(hex):
150
BkSp, Clear, Enter
Figure E-3. Net Id Screen
SUBNET MASK
Enter Subnet Mask:
255.255.255.0
Bksp, Clear, Enter
Figure E-4. Subnet Mask Screen