Field Service Ver. 4.0 Feb. 2006
10.5 NETWORK
10.5.1
DHCP:XX / BOOTP:XX
Function
• DHCP : Automatically acquires an IP address from the DHCP server, if there is one
• BOOTP : Automatically acquires an IP address from BOOTP and specifies whether
Use
• To automatically acquire an IP address and load other network information.
Setting
• Turn "ON" either DHCP or BOOTP or "OFF" both.
/procedure
• The default setting is DHCP: ON / BOOTP: OFF.
"DHCP:ON / BOOTP:OFF"DHCP:OFF / BOOTP:ON DHCP:OFF / BOOTP:OFF
10.5.2
IP ADDRESS
Function
• Sets the IP address of the printer on the network.
Use
• To enter the printer's IP address.
Setting
• Enter the IP address using the up, down, right, and left arrow keys.
/procedure
• The default setting is "192.168.1.2."
NOTE
• Before manually setting the IP address, turn OFF DHCP and BOOTP in the
NETWORK → DHCP:XX/BOOTP:XX menu.
10.5.3
SUBNET MASK
Function
• Sets the subnet mask of the printer used on the network.
Use
• To enter the printer's subnet mask.
Setting
• Enter the subnet mask using the up, down, right, and left arrow keys.
/procedure
• The default setting is "255.255.255.0."
NOTE
• Before manually setting the subnet mask, turn OFF DHCP and BOOTP in the
NETWORK → DHCP:XX/BOOTP:XX menu.
10.5.4
GATEWAY
Function
• Sets the gateway address of the printer used on the network.
Use
• To enter the printer's gateway address.
Setting/
• Enter the gateway address using the up, down, right, and left arrow keys.
procedure
• The default setting is "192.168.1.1."
NOTE
• Before manually setting the gateway address, turn OFF DHCP and BOOTP in
the NETWORK → DHCP:XX/BOOTP:XX menu.
10.5.5
MAC ADDRESS
Function
• Displays the Ethernet hardware address of the printer.
Use
• To display the printer's Ethernet hardware address.
Setting
• The address is displayed only and cannot be altered.
/procedure
in the network, and specifies whether to load other network information.
to load other network information.
10. Menu (magicolor 2430 DL)
85