Usb - Konica Minolta magicolor 2400W Service Manual

Field Service Ver. 4.0 Feb. 2006
(3) NETZONE
Function • Specifies the first part of the Macintosh EtherTalk zone name.
Use • To set the Zone name on Macintosh EtherTalk (AppleTalk) network where the printer
is located.
• The zone name can contain a maximum of 16 characters.
Setting
• The default setting is ✱.
/procedure
(4) NETZONE 2
Function • Specifies the second part of the Macintosh EtherTalk zone name.
Use • To set the Zone name connected with Macintosh EtherTalk (AppleTalk) network
where the printer is located.
• The zone name can contain a maximum of 16 characters.
Setting
• The default setting is NULL.
/procedure
D. ETHERNET SPEED
Function • Specifies the transmission speed for the network and the transmission method for bi-
directional transmission.
Use • To set the specific network speed and the transmission method.
Setting • The default setting is Auto.
/procedure
NOTE
• Make sure to turn the Power Switch OFF and ON again after changing the net-
work speed.
E. PS PROTOCOL
Function • Selects whether PostScript jobs are received in the binary format or the quoted
format.
Use • To transmit PostScript data in quoted format.
Setting • The default setting is BINARY.
/procedure
12.6.2

USB

A. ENABLE
Function • Specifies whether to enable or disable USB.
Use • To disable USB.
Setting • The default setting is YES.
/procedure
"Auto" 100 Full Duplex
10 Full Duplex
"BINARY"
"YES"
12. Menu (magicolor 2450)
100 Half Duplex
10 Half Duplex
QUOTED BINARY
NO
105
2