Field Service Ver. 4.0 Feb. 2006
8.2.7
RoHS sensor support
Function
• Sets supportability of the Temperature/Humidity Sensor (HS1) for RoHS.
Use
• When the Temperature/Humidity Sensor has been replaced with a new one.
Sensor supporting RoHS
Sensor not supporting RoHS : No
Setting
1. Connect the printer to the PC.
/procedure
2. Execute the "HumiditySensor.exe" Service Support Tool.
3. Click "Status" to check the current setting.
4. Click to select "Yes" or "No" as necessary.
5. Click "Status" again to make sure that the setting has been correctly changed.
6. Turn the Power Switch OFF and then ON again.
8. Description of the Control Panel (magicolor 2400W)
: Yes
71