Duplex; Orientation; Page Recovery; Quality Menu - Konica Minolta magicolor 2400W Service Manual

Field Service Ver. 4.0 Feb. 2006
12.4.2

DUPLEX

Function • Selects whether or not the duplex print function is used.
Use • To use the duplex print function.
OFF
LONG EDGE : The pages will be printed on both sides of the paper for long-edge
SHORT EDGE : The pages will be printed on both sides of the paper for short-
Setting • The default setting is OFF.
/procedure
"OFF"
NOTE
• This setting is available only when a Duplex Option is installed.
12.4.3

ORIENTATION

Function • Specifies the orientation of the media.
Use • To change the orientation of the media.
Setting • The default setting is PORTRAIT.
/procedure
12.4.4

PAGE RECOVERY

Function • Selects whether or not the page is printed again after recovering from a media
misfeed.
Use • To specify the point from which printing should continue after a media misfeed.
ON
OFF : Printing continues with the next page without reprinting the misfed page.
Setting • The default setting is ON.
/procedure

12.5 QUALITY MENU

12.5.1

REPLACE TONER

A. BLACK/CYAN/MAGENTA/YELLOW
Function • Moves the specified color of Toner Cartridge into replacement position, so it can be
replaced.
Use • To replace the specified color of Toner Cartridge.
Setting 1. Select QUALITY MENU→TONER and the specific color of toner to be replaced.
/procedure 2. The rack rotates to bring the specified color of Toner Cartridge to the replacement
position. When the rack stops moving, the message "OPEN DOOR AND REPLACE
(color) TONER" appears on the display.
3. Open the Upper Cover and replace the Toner Cartridge.
☞
For the Toner Cartridge replacement procedures, see "Maintenance."
4. Close the Upper Cover. The initial screen will then reappear.
: Duplex printing is not possible.
binding.
edge binding.
LONG EDGE
"PORTRAIT"
: The page that was misfeed is printed again.
"ON"
12. Menu (magicolor 2450)
SHORT EDGE
LANDSCAPE
OFF
101
2