Field Service Ver. 4.0 Feb. 2006
6.3.7
Control Panel (PWB-OP)
[2]
[4]
4139F2C513DA
[1]
[1]
4139fs2514c0
[3]
4139fs2515c0
NOTE
Precautions for Remounting the Front
Cover
1. When remounting the Front Cover,
make sure that the two tabs in
section A are properly fitted in
position.
2. When tightening the screws, make
sure that there is no clearance
between the machine frame and
Front Cover (in section B).
If there is any clearance, tighten
the screws, while pressing the
machine frame.
1. Open the Top Cover.
2. Remove four screws [1] and the
Control Panel Protective Cover [2].
3. Disconnect the connector [3] and
remove the Control Panel [4].
6. Other
35