8. Description of the Control Panel (magicolor 2400W)
B. Transfer Belt Unit
Function
• Resets the counter for the Transfer Belt Unit.
Use
• When the Transfer Belt Unit has been replaced with a new one.
Setting
1. Connect the printer to the PC.
/procedure
NOTE
• At this time, make sure that the Upper Cover of the printer is open.
2. Execute the "TransferBelt.exe" Service Support Tool.
3. Click "Status" to check the current counter reading.
4. Click "Yes" to reset the counter.
* To quit the function without resetting the counter, click "No" or "End."
5. Click "Status" again to make sure that the counter has been correctly reset.
6. Close the Upper Cover of the printer.
70
Field Service Ver. 4.0 Feb. 2006
4139fs3513c0
4139fs3523e0
4139fs3524e0
4139fs3525e0