Emulations - Konica Minolta magicolor 2400W Service Manual

Field Service Ver. 4.0 Feb. 2006
12.7.3

EMULATIONS

A. DEFAULT
Function • Specifies the printer control language.
Use • To change the printer control language.
• If AUTOMATIC is selected, the printer automatically selects the printer control lan-
guage from the data stream.
Setting • The default setting is AUTOMATIC.
/procedure
"AUTOMATIC"
B. AUTO DEFAULT
Function • Selects the printer description language when it cannot be identified from the data.
Use • To set the printer control language to be used when it cannot be automatically identi-
fied from the print job.
Setting • The default setting is AUTOMATIC.
/procedure
C. POSTSCRIPT
(1) ERROR PAGE
Function • Sets whether or not an error page is printed when a PostScript error occurs.
Use • To specify whether an error page should be printed if a PostScript error occurs.
Setting • The default setting is ON.
/procedure
D. PCL
(1) LINE TERMINATION
Function • Sets the CR/LF mapping for line termination in the PCL language.
Use • To change the CR/LF mapping.
Setting • The default setting is CR=CR LF=CRLF.
/procedure
(2) FONT
<PITCH SIZE>
Function • Sets the font pitch size in the PCL language when not specified by the printer driver.
Use • To set the font pitch size in the PCL language when it cannot be specified by the
printer driver during printing from Windows DOS, etc.
Setting • The default setting is 1000.
/procedure
POSTSCRIPT
"AUTOMATIC"
"ON"
"CR=CR LF=CRLF"
CR=CRLF LF=LF
12. Menu (magicolor 2450)
PCL5 PCL XL HEX DUMP PDF
PCL5 POSTSCRIPT
OFF
CR=CR LF=LF
CR=CRLF LF=CRLF
44 to 9999
107
2