Srp I/O Module - Juniper ERX-1410 Installation And User Manual

SRP I/O Module

Figure 1-8 SRP module
A single corresponding input/output module called the SRP I/O module
interfaces with one or two SRP modules through the system's midplane.
The same SRP I/O works with all models of the SRP module. This I/O
module is two slots wide. See
The SRP module provides standard craft management interfaces,
including:
• 10/100Base-T – a port for Ethernet management
• RS-232 – a port for VT100 management access
• External timing inputs – ports for external timing sources
For details about installing the SRP I/O module, see
ERX Modules.
Figure 1-2 and Figure
ERX System Modules 1-9
ERX Edge Routers
1-4.
Chapter 3, Installing