The Sample Editor - GEM genesys xp Owner's Manual

owner's manual
Genesys xp is equipped with a huge sample RAM memory 32 Mbytes, to accommodate the samples you wish to load. This memory can be used to increase
the sound database of the instrument. Sample can be loaded on board in compatible format, or directly sampled using the SAMPLE function in recording
studio.
NAVIGATION ENTER MENU
The main Sample editor screen consists of 16 slots, each able to house a sample that can compose a Waveform. A Waveform
may consist of one or more samples covering different keyboard ranges.
NAVIGATION
Loads a sample into the selected location, directly from the selected Ram
-Sound, from floppy disk or via MIDI from an external source (computer,
sampler, etc.).
Saves a sample to the instrument's Wave Library. Only samples which have
been assigned a keyboard extension are saved. Saving also escapes the
Sample editor.
Cancels the selected Sample from the main Sample editor display.
Assigns the selected sample to a keyboard range. This "assigned" sample
plays together with the other "assigned" samples that make up the
Waveform. Sample keyboard range overlaps are not permitted.
NAVIGATION
Loading a sample in a compatible format the options are enabled to edit and organize the samples as you want.
Page70

The Sample editor

SAMPLE EDITOR OPTION
F1 LOAD
F2 SAVE
DELETE
ASSIGN
DEASSIGN
Cancels the extension limits of the selected sample.
Opens a page showing information regarding the Waveform (Sample name
and type, properties, size, pitch, Sample rate, Loop Start, Loop End points
and the Loop status). Several parameters can be edited in this page and
other options are activated (Tuning, Normalize, Gain, Cut, Export).
SEND SAMPLE
Activates a sample Dump process to transfer (via MIDI) the sample to an
external device
genesys xp
EDIT
Realtime use of the Genesys xp