Table of Contents
Advertisement
owner's manual
Valid for Dual 3 and Dual 4 Algorithms only. The Balance Envelope corresponds to a mixer for the two oscillators which share a single Amplitude
Envelope.
BALANCE ENVELOPE
BALANCE ENV. AM. SENSITIVITY
BALANCE ENV. DYN. SENSITIVITY
KEY OFF BALANCE ENV. RATE DYN.
SENS.
ENVELOPE KEY ON & KEY OFF
The Balance Key On and Key Off Envelopes are 10 segment curves (maximum), allowing you to enhance the presence of one Waveform with respect to
the other in the key on and key release situations. The Key On Envelope represents the variation of the Balance for the entire duration that the notes are
held pressed. The Key Off Envelope represents the variation of the Balance after the notes have been released. The options and parameters used to shape
the Balance Envelope (Zoom, Segment, Time and Level), are identical to those used for the Amplitude Key On/Key Off Envelope.
BALANCE ENVELOPE TRACKING
Valid for all Algorithms. The Dual 1 and Dual 3 algorithms have two Filters connected in parallel [Filter os. 1, Filter os. 2]. The Dual 2 and Dual 4 algorithms
have two Filters connected in series [Filter 1, Filter 2]. Filters enhance or attenuate certain frequencies of the Waveforms. The sound changes according
to the type of filter selected. The Genesys xp filters are 2 pole filters with roll off curves at 12 dB per octave. If both filters are programmed with identical
parameter values, they become a single 4 pole filter with a roll off curve of 24 dB per octave, perfect for those classic analog synth sounds.
TYPE
Selects
the
Filter
type.
"Off"
deactivates
the
filter.
Assignable
values: Off, Low Pass, High Pass,
Band
Pass,
Parametric
boost,
Parametric cut.
CUTOFF FREQUENCY
Sets a value for the Cutoff Frequency,
or the frequency at which the filter
intervenes. The Cutoff Frequency is
the same for all the notes of a Sound,
unless you programme Filter Tracking.
Values range: 0-191.
RESONANCE
Applies resonance to the Cutoff frequency, creating a peak of emphasis at
the Cutoff frequency. A high value of resonance can place the filter on "auto-
oscillation", producing a whistling sound rich in harmonics. Values range: 0-127.
CUTOFF DYNAMIC SENSITIVITY
Links the Cutoff Frequency to Key On Velocity. Positive values increase the
Cutoff Frequency by playing harder (the filter opens resulting in a brighter
sound), negative values produce the inverse effect (the filter closes and the
sound becomes "dull"). Values range:+/-7. 0 = no effect.
RESONANCE DYNAMIC SENS
Links Resonance to Key On Velocity. Positive values enhance the Resonance
with increased key velocity while negative values give the inverse effect.
Values range: +/-7. 0 = no effect.
CUTOFF TOUCH SENSITIVITY
Links the Cutoff Frequency to Aftertouch. Positive values increasingly open
the filters with increased Aftertouch pressure, negative values have the
inverse effect. Values range:+/-7. 0 = no effect.
RESONANCE TOUCH SENSITIVITY
Links the Resonance to Aftertouch. Positive values increases the amount of
Resonance applied with increased Aftertouch pressure, negative values have
the inverse effect. Values range: +/-7. 0 = no effect.
Realtime use of the Genesys xp
BALANCE ENVELOPE
BALANCE ENVELOPE CONTROL PARAMETERS
Activates (On) or deactivates (Off) the Balance envelope. Assignable values: On, Off.
Depth of the action of the Amplitude envelope on Balance. The envelope is activated by the Balance
Envelope parameter above. Positive values increase the depth of the action of the envelope on Balance
while negative values have the inverse effect. Values range: +/-7 - 0 = no effect.
Links the Balance envelope response to key velocity variations. Positive values increase the response of
the Balance envelope with increased key velocity while negative values have the inverse effect. Values
range: +/-7 - 0 = no effect.
Links the response of the key off Balance envelope completion velocity to key velocity variations. Positive
values increase the completion velocity of the Key Off Balance envelope with increased key velocity
while negative values have the inverse effect. Assignable values: –7 ... +7. 0 = no effect.
Links the response of the key off Balance envelope completion velocity to key velocity variations. Positive
values increase the completion velocity of the Key Off Balance envelope with increased key velocity
while negative values have the inverse effect. Assignable values: –7 ... +7. 0 = no effect. BALANCE
The Balance Tracking allows you to vary the Balance setting across the keyboard. The option and
parameters used to shape the Balance Envelope Tracking curve, (Segment, Point, Key and Level), are
identical to those used for the Volume Tracking curve
FILTER
FILTER CONTROL PARAMETERS
Activates the envelope for the Filter in edit and sets the depth of action of the
Filter envelope. The envelope consists of two parts: "Filter Key On Envelope"
and the "Filter Key Off Envelope". Negative values invert the Filter Envelope.
Values range:+/-10.
Links the depth of action of the Filter envelope to changes in key velocity.
Positive values enhance the depth of action of the Filter envelope with
increased key velocity, negative values produce the inverse effect. Values
range :+/-7. 0 = no effect.
Links the depth of action of the Filter envelope to changes in Aftertouch pressure. Positive
values enhance the depth of action of the Filter envelope with increased Aftertouch pressure,
negative values produce the inverse effect. Assignable values: +/-7. 0 = no effect.
genesys xp
FILTER ENVELOPE AMOUNT
FILT. ENV AMOUNT DYN. SENS.
AMNT. TOUCH. SENS.
NOTE
Tracking curves and envelopes have the same screen and
parameters as the amplitude in the previous chapter.
Page67
Hide quick links:
Advertisement
Table of Contents
