GEM genesys xp Owner's Manual page 38

owner's manual
In this menu it is possible to set the POLY (polyphonic) or MONO (monophonic) mode for each track, for an accurate control
of your performance.
TRACK MODE
POLY The track play
polyphonic way
MONO L The track play
monophonic mode with
left priority
MONO R The track play
monophonic mode with
right priority
MONO T The track play
monophonic mode
with last playied note
priority
1
Press the function button F6 MODE/PRIORITY
2
Select the track using the UP/DOWN CURSOR buttons
5
Set the track priority ON by rotating the DIAL
Setting this function ON, the instrument assignes to the
selected track a "reserve" of polyphony. This ensures the other
playing parts will never steal notes from the selected track .
In this menu it is possible to set the dynamic response of the keyboard. 8 different response curves can be set Genesys xp.
Selection
1
Press the function button F7 VEL. CURVE
2
Select the track using the UP/DOWN CURSOR buttons
NOTE: The DETUNE, RANDOM PITCH, TOUCH SENS, MODE PRIORITY, VEL.CURVE, VEL RANGE parameters
are designed for realtime MIDI control of the Genesys xp though an external master keyboard. Please
also refer to the chapter of this manual dedicated to the xp MIDI control.
Page30
F6 MODE PRIORITY
in
in
in
in
F7 VEL. CURVE (
Curve Type
Normal
Normal
Normal
Reverse
(playing the keys harder the
volume will decrease)
Reverse
Reverse
Reverse
3
Select the track mode by rotating the DIAL
4
Select the track priority column using the CURSOR right
6
Press STORE then ENTER to confirm editing
)
VELOCITY CURVE
3
Select the curve by rotating the DIAL
4
Press STORE then ENTER to confirm editing
To use the genesys xp as a stand alone unit
genesys xp