GEM genesys xp Owner's Manual page 68

owner's manual
Press ESCAPE from the previous page, select the PEDAL MENU with the cursor then press ENTER.
NAVIGATION ENTER MENU
The pedal programming page appears in the display. From this menu you can set the pedal programming and assign the
current preset.
NAVIGATION DATA INPUT
ASSIGNABLE CONTINUOUS CONTROLLER
Off No effect
Pitch Bend Applies Pitch Bend to the notes. The Pitch Bend sweeps from the maximum
negative to maximum positive. The central position of the continuous pedal
corresponds to 0 pitch.
Pitch + Increases the Pitch
Pitch – Decreases the Pitch
Filter Opens/closes the Filter Cutoff parameter
Resonance Affects the Resonance parameter
Modulation Generate modulation data message (CC01)
Breath Cnt. Generates Breath controller message (CC02)
Volume Controls the general volume (CC07)
Pan Controls the Pan (CC10) from left to right.
Expression Controls the volume from 0 level to the maximum settings of the mixer levels.
Vocal G. Controls the volume of the Vocal harmony track using the Vocal Genius
Volume
CONTINUOS
ASSIGNABLE
CONTROLLER PEDAL
SWITCH PEDAL
Page60
CONTINUOS SWITCH
Off
Damper
Sostenuto
Soft
Synchro
Intro
Fill <
Fill =
Fill >
Ending
Variation 1
Variation 2
Variation 3
Variation 4
Var >
Var <
Memory>
Memory<
Harmony
Bass Inv.
Arrange On/Off
Fade In/Out
Tempo >
Tempo <
Punch
Rotary s/f
Minor
Dim
Min
Maj 7th
Voc. Genius on/off
Freeze Chord
genesys xp
MULTIPEDAL
Is the current page where
you assign the functions to
your pedal
Multiped 1
Selects the pedal assign
Multiped 2
function page
Multiped 3
F3 - F5 MULTIPEDAL
Allows to program the
pedals special MULTIPEDAL
mode.
ASSIGNABLE SWITCH CONTROLLER
No effect
Applies the sustain effect to the released notes.
Sustains only the notes played at the time of pressing the pedal; notes played
after pressing the pedal are not affected.
Attenuates the sound.
Start/Stop Simulates the Start/Stop button.
Enable /disable the syncro function
Activates the Intro.
Activates the Fill< function.
Activates the Fill function.
Activates the Fill> function.
Activates the Ending function.
Switches to Variation 1.
Switches to Variation 2.
Switches to Variation 3
Switches to Variation 4.
Switches to the next Variation.
Switches to the previous Variation.
Advances to the next memories
Advances to the previous memories
Activates/deactivates the Harmony function
Enables/disables the Bass inv. function
Activates/deactivates the Arranger
Activates/deactivates the Fade In/Out function.
Increases the Tempo setting by one unit at a time.
Decreases the Tempo setting by one unit at a time.
Activates/deactivates the Punch recording function during recording operations.
Changes the speed of the Rotary effect from Slow to Fast or vice versa.
Converts the currently held chord to the minor chord.
Converts the currently held chord to the diminished chord.
7th Converts the currently held chord to the minor 7th chord.
Converts the currently held chord to the Major 7th chord.
Enable/Disable the vocal processor
Locks the current chord (pedal held), allowing you to play freely with both
hands across the entire key-board without triggering changes in the Style
auto-accompaniment. The function deactivates at pedal release.
Realtime use of the Genesys xp
F1 PEDAL PROG.
F2 PEDAL ASSIGN