GEM genesys xp Owner's Manual page 44

owner's manual
In this menu it is possible to set the panoramic position for each sound assigned to the track.
1
Press the function button F2 PAN
Repeat the operation as many time as you need. Once your edit is complete remenber to press STORE then ENTER to confirm it.
NOTE: to listen the effect of panning, the Genesys xp has to be connected to a stereo speaker system.
This parameter add to the selected sound a percentage of randomic pan effect.
1
Press the function button F3 RANDOM PAN
Repeat the operation as many time as you need. Once your edit is complete, remenber to press STORE and ENTER to confirm it.
This menu assign the audio out to the sound of the selected track.
1
Press the function button F4 AUDIO OUT
Page36
F2 PAN
PAN BALANCE
Pan = -31 signal totally to LEFT
F3 RANDOM PAN
F4 AUDIO OUT
Select a track with the UP/DOWN CURSOR, then adjust the
2
pan by rotating the DIAL
Pan = 0 signal centred
C
L R
Select a track with the UP/DOWN CURSOR, then input the
2
random pan by rotating the DIAL
2
Select a track with the cursor, the set the audio out with the DIAL
The default assign the audio out to the main Left+Right out
3
Once the edit is complete press STORE and ENTER to confirm it.
WARNING!
To listen the audio signal from the auxiliary audio out: OUT1 and
OUT2, these have to be connected to a mixer.
Aux audio out 1 and 2 are without DSP effects (dry segnal)
To use the genesys xp as a stand alone unit
genesys xp
Pan = +31 signal totally to RIGHT
The sound is assigned to both
the aux out 1+2
The sound is assigned to the
aux out 1 (mono out)
The sound is assigned to the
aux out 2 (mono out)