GEM genesys xp Owner's Manual page 48

owner's manual
EFFECTS PROGRAMMING
This page allows to program the parameters of the effect selected in the EFFECT TYPE page. Each effect family has a different set
of programming parameters.
1
Enter the page pressing the button F4
3
Adjust the value with the DIAL
Once the edit procedure in Ram is complete (song transpose, mix and effect data etc.) the song has to be saved in the hard
disk (or floppy) in order to play from the player, from the DB list or the play list.
1
Press the DISK button on the main panel
2
Select the RAM pressing the function button D
At this point the SAVE option in the screen is enabled and you
can select the type of data to save.
SAVE the entire Genesys xp RAM memory content
In case other custom data like: sounds, presets, style presets,
user styles, memories, are stored in ram their folders are
automatically showed in the scrreen.
Page40
To save on the hard disk the edited song
2
Select the parameter you want to modify with the UP/DOWN CURSOR
4
Press STORE then ENTER to confirm the edit
3
Select the SONGS folder with the RIGHT CURSOR
SAVE all the songs stored in RAM
Saving now all the songs you have in memory (from1 to 64
locations) are saved in the hard disk.
To save a SINGLE SONG, press the RIGHT CURSOR again
4
then press the F2 SAVE function button
In case more songs are stored in memory, you can select
them with the UP/DOWN CURSOR
To use the genesys xp as a stand alone unit
genesys xp