GEM genesys xp Owner's Manual page 37

owner's manual
This menu allows to add a detune value to a track. This can be used for example to give more "fatness" simulating the analog
synth sounds.
1
Press the function button F3 DETUNE
2
Select the track using the UP/DOWN CURSOR buttons
This menu allows to add a random pitch value to a track. This can be used for example to give more reality simulating the
analog synth oscillators.
1
Press the function button F4 RANDOM PITCH
2
Select the track using the UP/DOWN CURSOR buttons
This menu allows to disable the track's dynamic control from the external MIDI keyboard you are using.
The TOUCH SENS is set
ON in all the tracks by
the Genesys xp default
setup
1
Press the function button F5 TOUCH SENS
2
Select the track using the UP/DOWN CURSOR buttons
NOTE: remember to press the button PART on the main panel to swich the tracks from 9 to 16 (then 17- 24, 25-32).
To use the genesys xp as a stand alone unit
F3 DETUNE
3
Set the detune value using the DIAL (or the INC/DEC buttons)
4
Press STORE then ENTER to confirm editing
F4 RANDOM PITCH
3
Set the random pitch value using the DIAL (or the INC/DEC buttons)
4
Press STORE then ENTER to confirm editing
F5 TOUCH SENSITIVITY
3
Disable or Enable Touch Sens. using the DIAL (or the INC/DEC buttons)
4
Press STORE then ENTER to confirm editing
genesys xp
Page29