GEM genesys xp Owner's Manual page 50

owner's manual
Description: DISK DRIVES Description: DISK DRIVES
A D
FROM TO BUTTONS
Drives selection area
E SCSI
The SCSI is enabled only
installing on board the optional
SCSI card and connecting a
compatible SCSI device
G UTILITIES
Enter the utility page of the
selected drive
H PROPERTIES
Show the properties of the
selected driver
The Genesys xp data loading operation suppose you select a source driver (where the data are currently stored) and a
destination driver (where you want to load the data).
As the same as loading the save operation suppose you select a source driver (where the data are currently stored) and
a destination driver (where you want to save the data).
Suppose to copy song data from a floppy disk to the internal Genesys xp hard disk.
1
Insert a floppy disk with some Gem Song in
the drive
2
Press the DISK button on the panel, then F1 floppy disk
3
Select the folder or file to copy with the LEFT/RIGHT CURSOR
In the same way it is possible to copy compatible size data from the internal hard disk to the floppy disk.
Page42
F1 LOAD
SOURCE
FLOPPY DISK
MIDIFILES
GEM Songs
Genesys data
Wav
Mp3
HARD DISK
CD ROM
RAM
F2 SAVE
F3 COPY
FROM
FLOPPY
DISK
4
Press F3 COPY, then ENTER two times
5
The selected data are copied in the hard disk
Enter the data loading screen
Enter the data saving screen
Copy a selected file a in a
destination driver
Delete a selected file or folder
Rename a selected folder
Enter the multicopy function (see
pag 12)
Enter the Collect function (see
pag 13)
DESTINATION
HARD DISK
RAM
Mp3 can not be
loaded in Ram
CD ROM
FLOPPY DISK
RAM
HARD DISK
RAM
HARD DISK
FLOPPY DISK
TO
HARD
DISK
To use the genesys xp as a stand alone unit
genesys xp
F1 LOAD
F2 SAVE
F3 COPY
F4 DELETE
F6 RENAME
F7 MULTICOPY
F8 COLLECT