Move To The Edit Parts Page - GEM genesys xp Owner's Manual

owner's manual
With this parameter you can control the MIDI velocity range values within the sound assigned to the selected track.
1
Press the function button F8 VEL. RANGE
2
Select the track using the UP/DOWN CURSOR buttons
3
Set the minimun velocity value by rotating the DIAL
The sound assigned to the track will start playing when the
minimum velocity value will be equal to 64, until to 127.
NOTE: Using this features it is possible to create
complex "velocity switch" presets.
With this parameter you can add a programmable MIDI delay (from 0 to 768) to the sound assigned to the track.
1
Press the function button F2 DELAY
2
Select the track using the UP/DOWN CURSOR buttons
To use the genesys xp as a stand alone unit
F8 VEL. RANGE (
VELOCITY RANGE
Move with the CURSOR RIGHT to the the max. velocity value
4
field
5
Set the max velocity value by rotating the DIAL
The sound assigned to the track will stop playing once the
max. velocity value (90) will be reached.
Once the programming is completed, press STORE then
6
ENTER to confirm editing.
Pressing the ESCAPE button the Preset & Sound Edit main
page will returns.

Move to the Edit Parts Page 2

F2 DELAY
3
Set the delay value with the DIAL
Repeat this operation as many times as you need
Once the programming is completed, press STORE then
6
ENTER to confirm editing.
genesys xp
)
Full Range velocity
response (from 0 to 127)
recalled by default.
1 3
2
Page31