System Set Up Page - GEM genesys xp Owner's Manual

owner's manual
Other system set up page options:
1
Select the option with the cursor Down, then press Enter
3
A progressive check bar appear in the screen, showing
the operation working progress.
5
A progressive check bar appear in the screen, showing the
operation working progress.

System set up page

By accident, the O.S. corrupt some of its internal files, this could cause some
malfuction or fault. Use this option to restore the operating system direclty
from the hard disk.
This function allows to load an operating system contained from the CD to the
internal RAM, without saving it in the hard disk.
Use this option to restore the hard disk factory set up from the O.S. CD Rom.
WARNING! This option format the entire hard disk, please back up all your
important data contained in the hard disk before its activation.
This option allows to control the hard disk and system ram memory integrity
status. Please run this option if you suspect some HD or Ram malfunctioning.
2
Press F1 to execute, or Escape to quit the function
Once the hard disk check is complete this message will
4
appear in the screen. Pressing Enter or Escape the Ram
check procedure will start.
Once the Ram check is complete the following message will
4
appear in the screen. Pressing Enter or Escape the interal
memory is restored.
genesys xp
Page5