Putting A Call On Hold In Line Appearance Mode - AT&T SB67030 User Manual

Synapse SB67030/031 Deskset & Accessories User's Guide

Putting a Call on Hold in Line Appearance Mode

In Line Appearance mode, all Desksets that share assigned lines can view held calls and
take calls off hold.
To hold calls and manage held calls:
1. When you are on an active call, press HOLD.
The Held Call icon
On other Desksets that are assigned that line, the Line Appearance LED flashes

slowly. Someone at any other Deskset assigned that line can press the flashing
Line Appearance key to take the call off hold, making it an active call on their
Deskset.
All Desksets, including those that are not assigned that line, can view and take

your call off hold from the Held Calls list. See
page
When you put an Intercom call on hold, only you can take the call off hold.

When a call is on hold, you can use the Deskset Menu to access other functions.

After the call has been on hold for a delay period set by your system

administrator (the default setting is three minutes), the Deskset rings to remind
you that the call is still on hold.
2. To take the call off hold, press SELECT or press the Line Appearance key for that call.
Call Management
appears and the Line Appearance LED flashes slowly.
12:30PM Thu Feb 25 2010
Graham Bell
HoldList
111.
75
232-555-0176 2:51
Quick
Dial
DND Page
"Accessing the Held Calls List" on
Back to Contents