Cordless Headset Description - AT&T SB67030 User Manual

Synapse SB67030/031 Deskset & Accessories User's Guide

Cordless Headset Description

The registration process described in the manual that comes with the Cordless
Headset is not appropriate for the Deskset, which requires a different process.
The correct process is described in
on page
1. ON/OFF
2. VOLUME +/– Press the volume key on the side of the Headset to adjust the
3. MUTE/FLASH Press to mute the microphone during a call. The Headset beeps
4. Battery Cover Open to install or replace the battery.
5. Earpiece
Overview
191.
Figure 20. TL7600 Cordless Headset Features
Press to make or answer a call, and to end a call.
The light is on when the Headset is charging in the Headset charger.
The light flashes slowly when you are on a call and flashes quickly
when there is an incoming call.
NOTE: To answer a call while you are already on a call, press ON/
The first call is dropped. Press ON/
listening volume when on a call.
every 10 or 15 seconds while you are on hold.
Press to mute the ringtone in the earpiece when there is an
incoming call.
FLASH is inoperative with the SB67030/031 Deskset.
When you receive calls, the Headset earpiece plays a ringtone. The
Headset does not have an external ringer.
41
"To register the TL7600 Cordless Headset:"
1
5
2
3
4
to answer the next call.
OFF
Back to Contents
.
OFF