Cordless Handset Battery Charging; Cordless Handset Low Battery Notification - AT&T SB67030 User Manual

Synapse SB67030/031 Deskset & Accessories User's Guide

Cordless Handset Battery Charging

Place the Handset in the charger when not in use. When fully charged, the Handset
battery provides approximately five hours of talk time or three days of standby time.
To charge the Handset battery:
1. Place the Handset in the charger.
The CHARGE light is on when the Handset is charging.

If the Handset has not yet been registered, the Register screen appears within

15 seconds.
Follow the directions on the screen to register the Handset to a Deskset. See
"Registering an Optional Cordless Handset" on page

Cordless Handset Low Battery Notification

When the battery is low, the Handset emits an alert tone and displays the Low Battery
notification screen as shown in Figure 17.
Overview
Charge Light
12:00a Jan. 00 12:00a Jan. 00
REGISTER
1/3
To register Handset:
1. Go to your
Deskset.
2. Press MENU.
3. Select User
12:30p Feb 23
EXT 249
Low Battery.
John Smith
Please place in
charger.
2 Missed Calls
5 New MSGs
IGNORE
Figure 17. Low Battery Warning
36
Back to Contents
189.