Cordless Accessory Registration And Deregistration Time-Out - AT&T SB67030 User Manual

Synapse SB67030/031 Deskset & Accessories User's Guide

Cordless Accessory Registration and Deregistration Time-Out

If the cordless device is registered to another Deskset or telephone, it must be
deregistered first. See
page
For security reasons, the registration process on both Deskset and cordless accessory
terminates after the time-out period of two minutes if registration is not successful.
If the registration process times out on the cordless accessory, the cordless accessory
resets itself. The Deskset returns to the unregistered cordless accessory startup screen.
The Handset displays Registration Failed if the process times out.
If the registration process times out on the Deskset, it displays Registration Failed and
returns to Idle mode.
If Cordless Headset registration fails, the ON/OFF light on the Headset flashes twice
every five seconds. To reset the Headset, remove the Headset from the charger and try
the registration process again, beginning with Step 1,
Headset:" on page
Deskset Settings
"Deregistering a Cordless Handset or Headset" on
192.
191.
194
Back to Contents
"To register the TL7600 Cordless